File information

Last updated

Original upload

Created by

MrScsi

Uploaded by

mrscsi

Virus scan

Safe to use

Tags for this mod

About this mod

Always bothered me that to make a gasser out of the 57 chev you had to use a WishBone or make it a 4wd....

Requirements
Permissions and credits
Donations
So here is a fun little project that I actually been kicking around my head for months but just now got around to doing...  It always bothered me that to make a gasser out of the 57 chev you had to use a WishBone or make it a 4wd.... So I made this one.... Modeled AFTER the 4wd powered leaf front end you will notice changes like no diff but you have solid axles that goin in on each side cause making a spindle and nothing else would be boring.... At least this way you have some parts to take off 

To use it go into car editor and make a new config for the car you want to use it on and under suspensions select #GasserFrontEnd for the center and #FrontRightGasser for left and right wheels and thats about it... YOU can set your tires and wheels real skinny on the front and then under suspensions set the front track where it looks good and set front height to -0.16 (what I got) and it looks GREAT I think with 20 in wheels 

I was gonna put it UNDER the springs but when I did all kinds of bolts and nuts decided to act up and I may still do it in a later ver right now it aint gonna make it any higher since that is a setting in the config...  


I THINK I got all the blocking right and will play it a few times tonight to make sure so tomorrow what you get is fixed....