0 of 0
File information
Created by
SalientPhantomUploaded by
SalientPhantomVirus scan
Some manually verified files
Behold, the spiritual successor to MACE (iykyk), unfortunately not sponsored by RailScales or Knights Armament
I want to thank everyone who donated and/or encouraged me so this overhaul could happen.
This mod is intended to be end-all of MK18 expansions (until I make the 2000 Year Empire). I am putting it here at the top: NO ONE ELSE'S MK18 EXPANSION WILL BE COMPATIBLE WITH THIS!
The MK18 1000 Year Empire changes how the MK18 is structured. You now have the ability to switch handguards and barrel lengths. I've also added things like a sight mount and riser system (although it is a bit finnicky). THIS MOD IS FOR THE NEWEST VERSION OF THE MK18!
I've added a lot of aftermarket and clone parts to the MK18. I've avoided putting in any crappy parts like red and skeletonized garbage you'd find on Facebook Marketplace or Gunbroker. I also replaced a bunch of parts with superior models. There are one or two stupid models (like that dumbass OMM mount and GBRS parts)
Things to Note
(For the love of Allah (SWT), please read these)
As previously stated, this is incompatible with anyone else's MK18 expansion, including my previous Armory Projects, so make sure this is the only one enabled. Fret not, for the majority of the parts included in the previous APs are in here or have an equivalent analogue. Remove any loose files you may have in the original MK18 mod as parts from those mods are overridden here.
There is no seamless scope switching. This means that for the backup sights you see in the screenshots, there is no way to switch between the two as seen in Call of Duty or Tarkov. You would have to remove the mount and backup sight to go back to using the original scope.
The M203 grenade launcher is not and WILL NEVER BE usable. It was included as a cosmetic request to someone who's donated so much to this project (love you Shadow).
The riser system is sorta buggy. It works with one-piece sights without any problems but use an Aimpoint mount and a sight and stuff will go where it doesn't belong. It tends to fix itself when you unequip the sight, equip the mount, and put the sight on it again. Play around with it. I tried my best to emulate Tarkov's riser system but it is hard to keep track of all those function calls. In any case, just use a riser on the one piece scopes (like the EOTechs). Maybe I'll find a more efficient way to do that system in the future.
A similar bug happens with the red dot mounted system on the LPVOs. If you are going to switch between scopes with the red dot on it, you'll find the front cap teleports into the receiver. To avoid this, take off the red dot and the RMR front cap, select your new scope, and then place those back on.
If you're wondering why something didn't make it in from the previous projects, it's because I either forgot or discovered it came from some glorified airsoft company like NcSTAR
There are a lot of EOTechs because the military loves EOTechs. I probably should've taken more screens with non-EOTech sights, but trust me, they're there.
I got lazy at a couple points, such as deciding which scopes get riser options. For the most part, it's just 1x and some of the higher power fixed scopes.
Credits
(oh lord)
(Unless specified otherwise, all artists can be found on ArtStation or CGTrader)
New MK18 receiver, Wilcox riser and magnifier mount, Geissele SMR MK16 handguards, KAC RIS handguard, Daniel Defense picatinny handguards, 260mm/370mm length barrels, BCM charging handle, A2 pistol grip, LMT SOPMOD stock, AN/PEQ-2, Surefire S4FP flash hider, HK Battle Grip, KAC rail covers all by Raider3DWeapons
Noveske Receiver and handguards, KAC PRT and MCQ QDC suppressor set (including flash hider), B5 SOPMOD stock, Daniel Defense Soundguard suppressor, SCISix flash hider, Irregular Defense rail covers, Special-K pistol grip, OMM, and handstops, KAC PVS-30 clip-on all by 3DMA
Majority of optics and mounts, MK4 handguards, MK8 handguards, URX-4 handguards, RailScales handstop, RSB, and LDAG, L5 magazine, Geissele scope mount set, Surefire X300U and M300/600 flashlights, Daniel Defense stock, Lancer L5 magazine, AN/PEQ-15, EOTech NGAL, Strike Industries LINK CFG, Wilcox RaptarS, Badger C.O.M.M. 34mm mount, Magpul RVG all by ParallaxGameStudios aka Cody Cudmore. Some of these parts were donated by Zephraim.
Magpul M-LOK AFG, Stark Express SE-5, Magpul M-LOK Bipod, KRISS DS150 stock, HK Gen II PMAG, AWC flash hider and suppressor, AAC 51T flash hider, DD Wave suppressor and brake, Gemtech ONE suppressor, Silencerco Hybrid 46 suppressor, EOTech OGL, Holosun AEMS, Strike Industries Cobra, Surefire Monster 556, ERGO pistol grip, HK Battle Grip with Beavertail, Hogue Overmolded pistol grip, Insight WMX200, FAB GL-CORE stock, HK Slim Line stock, HK E1 stock, Magpul PRS3 all by PsyTi
Arisaka handstop, finger stop, In-Line Surefire M-LOK and picatinny mounts, Side Scout mounts, Offset scout mounts, QD sling mount, GBRS mounts, T2 lens cap, Unity Axon SYNC switch, B&T suppressor and muzzle brake, Surefire M300V, TangoDown picatinny and M-LOK foregrips, Reptilia Aimpoint mounts by Ebrahim Diba
Dragon and Honeycomb RailScales, Wilcox Raid Xe, KAC High Rise mount, Magpul MIAD pistol grip, SIG Reduced Angle Grip, Zero Compromise scope, Leupold Mark 5 scope, KAC MAMS brake, Geissele A22 grip, KAC FF RAS 5 handguard, DD RIS III handguard, Insight SU-233/M3X, EOTech SU-231/553, BCM Gunfighter stock by Cannuccia
EOTech EXPS3 by Egor Kapashylov
16 inch AR-15 barrel, M4 waffle stock, Magpul MOE SL handguards, Magpul MOE pistol grip, KAC foregrip by 3DGunsmith
Matrix and MiniDot Railscales, Magpul CTR stock by Sided
Surefire XC1 by Alejandro Jimenez
Harris bipod by qww17
TangoDown SCAR Panel, SIG Romeo 9T by Turbojet-3D
ELCAN 1.5-6x by Ramka
Troy M7A1 PDW stock by LE3D
Surefire SF4P by CrimsonTopo (idk what he calls himself now)
BCM Gunfighter grip by Dmitry Marushko
Surefire X300V flashlight and Magpul MOE SL stock by Gunstudio1990
Noveske KX3 by Johannes Bazaryan
Magpul STR by Evgeny Evstifeev
HK Sturmgriff, HK Sturmgriff, B5 grip, VLTOR EMOD stock, GripStop handstop, VarioRay LLM, Troy Industries magazine by Akinaro
Magpul XT rail cover and AFG-1 by Rukremov
Classic M16/CAR-15 parts including M203 by Mattias H aka Tiggis (thank you again Shadow 0-1)
KAC Tri Mount and Triple Tap brake by Caique Baltazar
Wilcox Boss 300 by Javier Benitez
Surefire 60 round magazine, Magpul PMAG 40 by Luiz-Bueno
KAC SR-16 handguard, M16A2 stock, and Leupold Mark 4 scope by Garkain
HK Polymer magazine by VectorAU
Trijicon MRO Unity Mount (lent to me by Gordon_blonde) and ADM M-LOK mounts by GRY2048
LaRue Magpul RISR and HUXWRX suppressor and brake by MeatBanana
I want to thank everyone who donated and/or encouraged me so this overhaul could happen.
This mod is intended to be end-all of MK18 expansions (until I make the 2000 Year Empire). I am putting it here at the top: NO ONE ELSE'S MK18 EXPANSION WILL BE COMPATIBLE WITH THIS!
The MK18 1000 Year Empire changes how the MK18 is structured. You now have the ability to switch handguards and barrel lengths. I've also added things like a sight mount and riser system (although it is a bit finnicky). THIS MOD IS FOR THE NEWEST VERSION OF THE MK18!
I've added a lot of aftermarket and clone parts to the MK18. I've avoided putting in any crappy parts like red and skeletonized garbage you'd find on Facebook Marketplace or Gunbroker. I also replaced a bunch of parts with superior models. There are one or two stupid models (like that dumbass OMM mount and GBRS parts)
Things to Note
(For the love of Allah (SWT), please read these)
As previously stated, this is incompatible with anyone else's MK18 expansion, including my previous Armory Projects, so make sure this is the only one enabled. Fret not, for the majority of the parts included in the previous APs are in here or have an equivalent analogue. Remove any loose files you may have in the original MK18 mod as parts from those mods are overridden here.
There is no seamless scope switching. This means that for the backup sights you see in the screenshots, there is no way to switch between the two as seen in Call of Duty or Tarkov. You would have to remove the mount and backup sight to go back to using the original scope.
The M203 grenade launcher is not and WILL NEVER BE usable. It was included as a cosmetic request to someone who's donated so much to this project (love you Shadow).
The riser system is sorta buggy. It works with one-piece sights without any problems but use an Aimpoint mount and a sight and stuff will go where it doesn't belong. It tends to fix itself when you unequip the sight, equip the mount, and put the sight on it again. Play around with it. I tried my best to emulate Tarkov's riser system but it is hard to keep track of all those function calls. In any case, just use a riser on the one piece scopes (like the EOTechs). Maybe I'll find a more efficient way to do that system in the future.
A similar bug happens with the red dot mounted system on the LPVOs. If you are going to switch between scopes with the red dot on it, you'll find the front cap teleports into the receiver. To avoid this, take off the red dot and the RMR front cap, select your new scope, and then place those back on.
If you're wondering why something didn't make it in from the previous projects, it's because I either forgot or discovered it came from some glorified airsoft company like NcSTAR
There are a lot of EOTechs because the military loves EOTechs. I probably should've taken more screens with non-EOTech sights, but trust me, they're there.
I got lazy at a couple points, such as deciding which scopes get riser options. For the most part, it's just 1x and some of the higher power fixed scopes.
Credits
(oh lord)
(Unless specified otherwise, all artists can be found on ArtStation or CGTrader)
New MK18 receiver, Wilcox riser and magnifier mount, Geissele SMR MK16 handguards, KAC RIS handguard, Daniel Defense picatinny handguards, 260mm/370mm length barrels, BCM charging handle, A2 pistol grip, LMT SOPMOD stock, AN/PEQ-2, Surefire S4FP flash hider, HK Battle Grip, KAC rail covers all by Raider3DWeapons
Noveske Receiver and handguards, KAC PRT and MCQ QDC suppressor set (including flash hider), B5 SOPMOD stock, Daniel Defense Soundguard suppressor, SCISix flash hider, Irregular Defense rail covers, Special-K pistol grip, OMM, and handstops, KAC PVS-30 clip-on all by 3DMA
Majority of optics and mounts, MK4 handguards, MK8 handguards, URX-4 handguards, RailScales handstop, RSB, and LDAG, L5 magazine, Geissele scope mount set, Surefire X300U and M300/600 flashlights, Daniel Defense stock, Lancer L5 magazine, AN/PEQ-15, EOTech NGAL, Strike Industries LINK CFG, Wilcox RaptarS, Badger C.O.M.M. 34mm mount, Magpul RVG all by ParallaxGameStudios aka Cody Cudmore. Some of these parts were donated by Zephraim.
Magpul M-LOK AFG, Stark Express SE-5, Magpul M-LOK Bipod, KRISS DS150 stock, HK Gen II PMAG, AWC flash hider and suppressor, AAC 51T flash hider, DD Wave suppressor and brake, Gemtech ONE suppressor, Silencerco Hybrid 46 suppressor, EOTech OGL, Holosun AEMS, Strike Industries Cobra, Surefire Monster 556, ERGO pistol grip, HK Battle Grip with Beavertail, Hogue Overmolded pistol grip, Insight WMX200, FAB GL-CORE stock, HK Slim Line stock, HK E1 stock, Magpul PRS3 all by PsyTi
Arisaka handstop, finger stop, In-Line Surefire M-LOK and picatinny mounts, Side Scout mounts, Offset scout mounts, QD sling mount, GBRS mounts, T2 lens cap, Unity Axon SYNC switch, B&T suppressor and muzzle brake, Surefire M300V, TangoDown picatinny and M-LOK foregrips, Reptilia Aimpoint mounts by Ebrahim Diba
Dragon and Honeycomb RailScales, Wilcox Raid Xe, KAC High Rise mount, Magpul MIAD pistol grip, SIG Reduced Angle Grip, Zero Compromise scope, Leupold Mark 5 scope, KAC MAMS brake, Geissele A22 grip, KAC FF RAS 5 handguard, DD RIS III handguard, Insight SU-233/M3X, EOTech SU-231/553, BCM Gunfighter stock by Cannuccia
EOTech EXPS3 by Egor Kapashylov
16 inch AR-15 barrel, M4 waffle stock, Magpul MOE SL handguards, Magpul MOE pistol grip, KAC foregrip by 3DGunsmith
Matrix and MiniDot Railscales, Magpul CTR stock by Sided
Surefire XC1 by Alejandro Jimenez
Harris bipod by qww17
TangoDown SCAR Panel, SIG Romeo 9T by Turbojet-3D
ELCAN 1.5-6x by Ramka
Troy M7A1 PDW stock by LE3D
Surefire SF4P by CrimsonTopo (idk what he calls himself now)
BCM Gunfighter grip by Dmitry Marushko
Surefire X300V flashlight and Magpul MOE SL stock by Gunstudio1990
Noveske KX3 by Johannes Bazaryan
Magpul STR by Evgeny Evstifeev
HK Sturmgriff, HK Sturmgriff, B5 grip, VLTOR EMOD stock, GripStop handstop, VarioRay LLM, Troy Industries magazine by Akinaro
Magpul XT rail cover and AFG-1 by Rukremov
Classic M16/CAR-15 parts including M203 by Mattias H aka Tiggis (thank you again Shadow 0-1)
KAC Tri Mount and Triple Tap brake by Caique Baltazar
Wilcox Boss 300 by Javier Benitez
Surefire 60 round magazine, Magpul PMAG 40 by Luiz-Bueno
KAC SR-16 handguard, M16A2 stock, and Leupold Mark 4 scope by Garkain
HK Polymer magazine by VectorAU
Trijicon MRO Unity Mount (lent to me by Gordon_blonde) and ADM M-LOK mounts by GRY2048
LaRue Magpul RISR and HUXWRX suppressor and brake by MeatBanana
A special shout out to Deraze, Shadow 0-1, Sekken, Norsii, EpicRangeTime, and everyone else who donated to the Ko-fi, and of course, HyperX for making such a cool mod.