0 of 0
About this mod
A bug fix for the Magic Neep Timothy Teasdale Fluxweed Seed Bug, where you're supposed to collect some Fluxweed Seeds but the shop doesn't have any, which prevents you from completing Prof Garlic's second quest.
- Requirements
- Permissions and credits
Introduction
This bug usually occurs when you've used a mod to unlock seeds prior to starting the quest where you acquire the seeds. This breaks the quest and you'll arrive at the Magic Neep to find that Timothy Teasdale has no Fluxweed Seeds for you. Just to add insult to injury, he will still boast about having fully-stocked shelves! This "bug" can be solved using SQL Mod Menu, but that mod can be a little tricky to use. If you don't fancy that, try this mod instead.
Installation
You should be able to install the mod automatically using Vortex (then skip to step 4 below), but Vortex can be a bit unreliable with Hogwarts Legacy mods (it doesn't always delete mods properly) so I would recommend installing it manually as follows:
Note that you only need to follow the above process once. From now on the mod will just work.
Usage
Once the mod is installed it will change the first item in Timothy Teasdale's inventory to Fluxweed Seeds. Just go and collect them. Once you've done that you will no longer need this mod, so hit F8 to bring up the Blueprint Apparate Modloader window and hit the X next to MyFluxweedBugFix. That will unload the mod. It's probably wise to do this otherwise you'll never have access to the item that's usually the first one in Timothy Teasdale's inventory. You can also uninstall the mod as described below.
How to Un-Install
Either:
1) If you installed it via Vortex: Disable or Uninstall it via Vortex. BUT also CHECK that it's gone from the ~mods folder afterwards.
2) Delete zMyFluxweedBugFix-1009_P.utoc, zMyFluxweedBugFix-1009_P.ucas, and zMyFluxweedBugFix-1009_P.pak from the ~mods folder.
Conflicts
This mod uses pakchunk 1009. That's the same pakchunk as my Dittany Seed Bug Fix mod. I used the same pakchunk deliberately because these two mods are not compatible with each other - you can't have both installed at the same time or they'll both try to change the same inventory item. Delete the Dittany Seed Bug Fix mod from your ~mods folder before using this mod.
You can check if that conflicts with any of your other mods by running my PakChunk Checker batch script after you've installed the mod. If it does conflict, you can use the Chunk ID Conflict Manager to resolve the conflict.
This bug usually occurs when you've used a mod to unlock seeds prior to starting the quest where you acquire the seeds. This breaks the quest and you'll arrive at the Magic Neep to find that Timothy Teasdale has no Fluxweed Seeds for you. Just to add insult to injury, he will still boast about having fully-stocked shelves! This "bug" can be solved using SQL Mod Menu, but that mod can be a little tricky to use. If you don't fancy that, try this mod instead.
Installation
You should be able to install the mod automatically using Vortex (then skip to step 4 below), but Vortex can be a bit unreliable with Hogwarts Legacy mods (it doesn't always delete mods properly) so I would recommend installing it manually as follows:
- Download the mod.
- Unzip the contents.
- Move zMyFluxweedBugFix-1009_P.utoc, zMyFluxweedBugFix-1009_P.ucas, and zMyFluxweedBugFix-1009_P.pak to the Steam\steamapps\common\Hogwarts Legacy\Phoenix\Content\Paks\~mods\ folder.
- Install Blueprint Apparate Modloader if you haven't already.
- Start Hogwarts Legacy
- Load your most recent save-file.
- Press the F8 key to activate Blueprint Apparate Modloader.
- Type MyFluxweedBugFix in the little window and hit the Enter key on your keyboard.
- The word MyFluxweedBugFix should disappear and reappear lower down in that window with an X next to it. If it doesn't - if it stays on the top line - then either a) you put the .utoc, .ucas and .pak files in the wrong folder, or b) one of your existing mods is already using pakchunk 1009. Use my PakChunk Checker to check that. If you have a pakchunk conflict see the Conflicts section below.
- If it worked you should see a message on-screen saying that the mod has initialised.
- Press F8 again to close the modloader window.
Note that you only need to follow the above process once. From now on the mod will just work.
Usage
Once the mod is installed it will change the first item in Timothy Teasdale's inventory to Fluxweed Seeds. Just go and collect them. Once you've done that you will no longer need this mod, so hit F8 to bring up the Blueprint Apparate Modloader window and hit the X next to MyFluxweedBugFix. That will unload the mod. It's probably wise to do this otherwise you'll never have access to the item that's usually the first one in Timothy Teasdale's inventory. You can also uninstall the mod as described below.
How to Un-Install
Either:
1) If you installed it via Vortex: Disable or Uninstall it via Vortex. BUT also CHECK that it's gone from the ~mods folder afterwards.
2) Delete zMyFluxweedBugFix-1009_P.utoc, zMyFluxweedBugFix-1009_P.ucas, and zMyFluxweedBugFix-1009_P.pak from the ~mods folder.
Conflicts
This mod uses pakchunk 1009. That's the same pakchunk as my Dittany Seed Bug Fix mod. I used the same pakchunk deliberately because these two mods are not compatible with each other - you can't have both installed at the same time or they'll both try to change the same inventory item. Delete the Dittany Seed Bug Fix mod from your ~mods folder before using this mod.
You can check if that conflicts with any of your other mods by running my PakChunk Checker batch script after you've installed the mod. If it does conflict, you can use the Chunk ID Conflict Manager to resolve the conflict.