File information

Last updated

Original upload

Created by

firemanaf

Uploaded by

firemanaf

Virus scan

Safe to use

4453 comments

  1. firemanaf
    firemanaf
    • premium
    • 719 kudos
    Locked
    Sticky
    Anniversary Edition Notice

    Hi all. Any of my ENBs will technically work with AE version however, those presets that are (enb weather supported) require SKE64 and ENBHelper to identify weather codes and load the settings for that particular weather for best visuals. Granted, SKSE64 should be updated for AE but, it is looking like ENBHelper may not get updated due to author no longer working on Skyrim. You can use any of my ENB for AE but again, those that were designed for enb weather support won't quite look like it did on SE side. I apologize for the inconvenience. I probably won't do any updates to the ENB presets either until I see a more stable mod support for AE.

    Edit: Looks like SKSE and ENBHelper have test versions out therefore, if you updated to AE make sure you are using the correct SKSE and ENBbhelper versions needed for your Skyrim version. 
  2. firemanaf
    firemanaf
    • premium
    • 719 kudos
    Locked
    Sticky
    Natural View Tamriel (NVT) ENB Updated

    ---changes to 6.0---

    All Presets (2 Sept) Updated to ENB Binary .462. Adds in terrain parallax effect. Just note, at this time the setting can't be disabled/enabled in game. Has to be changed via the enbseries file.
    ---- Please read -----

    How to Install or Adjust settings- See videos on description page

    ENB Binary- Make sure you are constantly checking if you are using the most recent binary. Boris often updates without a version change which is important cause it often fixed bugs.

    AA- As of V2.0 I have add SMAA into the ENB (Thank you Rudy for help with this). It is up to you if you want to just use SMAA and/or TAA or FXAA or even both. Folder 3 I show how you can disable SMAA if you don't want to use. I still find TAA to be the best AA method though.

    Light/Lens flare - Currently (until fixed by Boris) lens flare is highly noticeable unless you adjust your skyrimprefs. It looks pretty bad. You will notice it if you are having issues. Open skyrimprefs and under [Display] look for bIBLFEnable= 1 and make bIBLFEnable=0.

    Animated Stars effect- This was added as of 2.0 due to enb binary .341. However, I do have it on but, it really depends on the star mods you are using. No mod is best and the animated affect works best with vanilla sky. You will most likely have to adjust the animated star settings under [Sky] to your preference and mod used.

    Night Eye- As of V2.7 I have nighteye working with ENB. However, it is tuned for vanilla nighteye effect. So, if you are using any mods that alter nighteye or vampire eye you may need to tweak the nighteye fix settings to trigger properly. See video on Desc page on how to tune in your nighteye. You can also adjust brightness, contrast and saturation to your needs under the nighteye section

    Issue downloading/extracting- Use 7-zip. Its a free program and will solve the issue

    Nights/Interiors too dark/bright- Use the quick adjustors in the enbeffectpostpass shader (I show how in folder 3 and "How to adjust" video). Or in the enbeffect shader for the time of day adjust adaptationmin setting.

    - Need more FPS- If you want the best quality but slightly more FPS adjust the following. Outside of game open the enbseries file and look for ResolutionScale-0.707 and SourceTextureScale=0.707 and change to 0.5.

    --- Special Thanks ----

    Thanks Rudy for helping me get SMAA into my ENB and phinix for integration of Nighteye fix. Of course still thanks to L00ping for getting reshade effects into my ENB as well in the ENB early stages.

    Thanks Maydragon/DarkDominion for being my regular testing and advisors on every update

    Of course thank you to all the user and supporters.

    If you notice and issues please let me know.
  3. firemanaf
    firemanaf
    • premium
    • 719 kudos
    Locked
    Sticky
    Night Eye Fix (Adjustment and Issues)

    All, in recent versions I updated "Night Eye Fix". It is enabled by default in current version. It may need some user tweaking. Please see my how to video on description page. Also note, it is not a perfect fix. It has issues where it can conflict with spell, shouts and other effects if shares similar parameters that trigger the fix. No way around it at the moment.

    If you notice your screen flashes and turns a dull color when using a spell, shout or other effect its the fix triggering for a second. It is not a bug. If you don't care for this you can disable the fix in the ENB in-game menu under the enbeffect shader and look for "use night eye fix" and uncheck it.
  4. Adfardo
    Adfardo
    • member
    • 0 kudos
    For all those who are bothered by Z-Fighting and ENB lights dimming when switching camera views (if you have the IFPV first person camera mod installed), here is the solution:

    In Skyrim.ini change the values ​​to these:
    [Display]
    fNearDistance=13.0000
    [Interface]
    fNearDistance=13


    And in IFPV.config.txt change the values ​​to these:
    NearClipExteriorDefault = 13
    NearClipExteriorDown = 13
    NearClipInteriorDefault = 13
    NearClipInteriorDown = 13

    These values ​​are ONLY for use with IFPV, with another camera mod and in vanilla - unexpected errors may appear (although z-fighting will definitely be fixed).
    P.S. The alternative camera mod "Improved Camera" causes more z-fighting and flickering lights problems, at least for me.
    P.P.S. IFPV is the ultimate camera mod (the best in my opinion), completely removing the first person view, replacing it with a third person camera, but directly from the character's head. It also helps with "sit anywhere" animation mods, where you get stuck in a floating pose if you switch to first person and stand up (jump key, usually).

    For those interested, here is my IFPV.config.txt, where I fixed all the bugs I found, including bow aiming, smooth body and camera rotation (as much as possible), and adjusted the camera position to better suit prone animation mods. HERE YOU ARE:
    Spoiler:  
    Show

    https://pastebin.com/ZePPirXU
  5. runescapebot
    runescapebot
    • member
    • 39 kudos
    I've tried other ENBs, but keep coming back to this.
    TNT was a bit too dark
    Culminated was a bit too saturated
    This is just right
  6. Delta06Wolf2000
    Delta06Wolf2000
    • member
    • 0 kudos
    hi this enb work with lux lux via and lux orbis? thanks guys
  7. DonMarcova
    DonMarcova
    • premium
    • 1 kudos
    Kudos! I've been using NVT with Obsidian weathers recently. My game looks beautiful, and I want to thank you for your good work.
  8. Mousey0304
    Mousey0304
    • premium
    • 0 kudos
    Is anyone familiar with having this preset in ENB Organizer? ENB isn't picking up weathers for some reason when this preset is turned on, the weather window just constantly shows me default.ini .


    Disregard, I didn't know there's a switch for weather editing in the settings, works as it used to now. My favorite preset of all time, tried many others but I just keep coming back to this one.
  9. Xenn2423
    Xenn2423
    • supporter
    • 8 kudos
    Hi! I've been using this ENB preset for over a year now and it's still my favorite on the Nexus. I have one question, though: Is it possible for me to adjust the brightness only for interiors with specific keywords (like LocTypeDwelling, for example)? The 1.0 setting for interiors in the quick adjust is perfect for dungeons, but too dark for homes and businesses. The 0.5 setting is great for buildings, but too bright for dungeons and caves. Do you know if there are any specific lines I can edit/add in the ini files to adjust the brightness if the location meets certain conditions?
  10. Avokh32
    Avokh32
    • supporter
    • 12 kudos
    Hello,

    I'm using this ENB (wonderful ENB by the way) with Obsidian Weathers. One gripe that I have though is that the grass at night glows in orange, while I would like it to be completely invisible (it's night). How do I realize this,?

    Thanks in advance.
  11. tedbash
    tedbash
    • member
    • 3 kudos
    I remember testing the medium cathedral version and it blow my fans and GPU like crazy (6650xt). 
    However, it was by far the best looking enb preset out there. May test it later again and check if i did anything wrong with something
  12. acrocantho
    acrocantho
    • member
    • 0 kudos
    Using NVT Vivid with Vivid Weathers and distant mountains are white at night and in snow/rain. Have tried fiddling with fogcolor/fogmultiplier as that has been the solution for others but I've had no luck so far. Any ideas?


    1. acrocantho
      acrocantho
      • member
      • 0 kudos
      reinstalling the enbseries.ini seems to have fixed it
  13. bigvadrouille549
    bigvadrouille549
    • premium
    • 18 kudos
    Hey ! It's pretty good your ENB for NAT mod but did you think you have hit about how exactly the youtuber got this sun light ? Because i tried to search as the youtuber said in your ENB and the NAT mod but i can't find the right ENB config for having his light

    Thank you !

    https://youtu.be/qo6JKvUMro8?si=n8-lnwhphmjf3Hdo