Please first read FAQ before do the same question.
Q. I updated from old PHP to Version2x, but the character does not posing and remains in idle. A. From v2.0 is not compatible with the original Poser Hotkeys or old Poser Hotkeys Plus(v1) and old save data. If you keep using old PHP's save data as it is, character will be idle. Please create the clean save or do new game.
Q. MCM is not showing. A. If do not show the MCM after waiting a few minutes, please try change the load order of esp. If it still does not showing, please enter "setstage ski_configmanagerinstance 1" from the console.
Q. I installed all required Mods but the poser presets does not displayed on MCM and menu. or I get an error that SKEE is not installed at startup. A.If you installed this Mods and after installing Campfire or Sexlab etc., it will be overwritten by old PapyrusUtil SE included in those Mods and will not function properly. So delete old PapyrusUtil SE included in installed mods or overwrite to new PapyrusUtil SE.
Q. How many poser Mods can registration? A. this mod is no limit. However, FNIS has an upper limit on the number of registrations, so the maximum number of FNIS registrations is the upper limit.
Q.FootIK OFF Spell is necessary? A. It is not necessary because automatically disable FootIK when posing.
Q. Where is the created face presets? Also can I publish the my face presets to Nexus? A. Version2 Face presets are saved in "Data/SKSE/Plugins/Poserhotkeys/FaceData" And you can publish your created face presets to Nexus.
Q.I downloaded optional presets, but not getting any poses showing. A.If the downloaded preset does not work, it is most users make installation mistakes. Please check that the downloaded preset is correctly installed in the following directory. "Data/SKSE/Plugins/PoserHotKeys/PoserData" And if using MO, make sure there are no older presets in the overwrite folder.
Many of the reasons it doesn't work are due to problems with the way users install it.
I'm often asked by nexus users to update the presets for each pose mod, but it's difficult in time to accommodate weekly pose mods like GS Poses. So I developed an editor that allows users to update their own presets.
This editor will allow you to add pose names and categorize to existing PHP presets and presets generated from PoserDataGen. Of course, edit your favorite preset, so you can create your own poser pack.
The editing operation is very easy.
1. Create a new preset or load an existing preset (JSON). Existing presets can be found at "Data\SKSE\Plugins\PoserHotKeys\PoserData". (If you are using Mod Organizer, register "PoserDataEdit.exe" and execute it from MO)
2. If you want to create a new preset, open FNIS_MODNAME_LIST.txt in the pose mod you want to use. Create a new file from the editor, add as many poses (rows) as you need, and enter the AnimEvent defined in the "AnimEvent" column.
For "PoseName", enter the pose name to be displayed in PHP's poser menu. (Double-byte characters can also be used) (If "PoseName" is empty, "AnimEvent" will be displayed as the pose name)
3. Saving the preset will update the PHP poser menu. (Presets must be saved to "Data\SKSE\Plugins\PoserHotKeys\PoserData")
This tool can be download from the Main file. Good luck.
2. Extract the zip folder, inside you'll find a file named "version-1-5-97-0.bin"
3. Copy this file into the mod folder of your already installed Address Library for SKSE plugins for AE (\mods\Address Library for SKSE Plugins\SKSE\Plugins)
4. PROFIT!
Now Poser Hotkeys Plus has been updated to your latest version.
is it safe to do? i used to use both versions of address library, i always loaded AE version after SE and i didn't have any problems with the latest version of the game but today i realized that i had both versions of the address library and i deleted the old SE version and i started a new game then i started to get this error: ''Address Library is not installed bla bla bla'' i still find it funny how i didn't realize that i had the old version of address library after installing 2.9k mods.. EDIT : well i tested it and it works but im not sure if it's safe to do or not, i have no clue about what im doing oh and i forgot to say Thank you.
It works normally, as far as I know it doesn't interfere, it is usually used to remove the warning that always appears when you are on 1.6.X. To remove this warning, library 1-5-97-0.bin be needed
if anyone else is having problems having their Address library detected, install the SSE version (1.5.X) of Address Library. Done, should work now. This will (as far as I tested) cause no issues, as Address Library claims it will automagically load the correct version for your game. If you aren't sure, put the outdated version earlier in your left panel than the updated version. It shouldn't make a difference, but you should have an organized left panel either way, so...
[POTENTIALLY SOLVED] No more error message. Shows up in MCM. Appears to work, so far.
Uninstalled Mfg Fix, installed opparco mfg instead. Install order looks to be: > Poser Hotkeys Plus > Opparco > More Informative Console ------------------------------------------------------------ ORIGINAL POST - In case it helps anyone: ------------------------------------------------------------ Any ideas?? I can't get past MfgConsoleFunc.pex. It's driving me mad.
"Error: The modified Mfg Fix Script(MfgConsoleFunc.pex) has been overwritten by another MOD. Please reinstall MfgConsoleFunc.pex of Poser Hotkeys Plus version because the original script has a problem that cannot be get the strength of facial expression."
Even if I click thru the error message (takes about 3 or 4 tries to get it to go away)... Nothing shows up in MCM. I waited a few minutes, and nothing showed. (I'm also using Menu Maid 2, which solved a different mod not showing in menu last week.)
I've tried loading Mfg Fix before PHP I've tried loading Mfg Fix after PHP
I've updated JContainers to 4.2.4 I've run Nemesis. Using OStim. (That works fine.) (OStim doesn't list this as incompatible, FWIW.) Using Photo Mode.
EDIT: Someone on Reddit posted a couple of years ago that starting a new game worked. I'll try that. UPDATE: New game didn't make any difference.
Yeah, good to hear. As I noted - it's solved now. It was nothing to do with the animation engine anyway. It was an issue Opparco vs Mfg Fix and overall load order.
@Suitablename2 That doesn't work- I still get the message. You must've done something else.
EDIT: Removing Poser Hotkeys, loading a save, saving again, and reinstalling Poser Hotkeys (now using MFG Fix instead of opparco's mod) apparently fixed the issue.
i'm having a issue, when i start an animation with either Free cam, auto face or similar the game crashes instantly... also crashes when i press to change the face... i have the newest skyrim version
It can run on SE version 1.5.97. If you have installed this mod and the character remains idle after activation, please follow me. 1. Close Poser Hotkeys Plus SSE and all referenced action mods. 2. Enter the game, load the save file, save and exit. 3. Download PoserDataGen（ https://www.nexusmods.com/skyrim/mods/72623 ） 4. Extract PoserDataGen and add a reference instance of PoserDataGen.exe in your mo2 5. Enable your poserdatagen in MO2, press the chair skyrim director to select your game directory (if correct, it will display a list) 6. Generate pose data. It will display a path to save the new JSON file 7. Copy these files to mods \ Poser Hotkeys Plus SSE \ SKSE \ Plug ins \ PoserHotKeys \ PoserData 8. Enable Poser Hotkeys Plus SSE and refresh fnis and neme If your mod is successfully used, it will display "Poser Hotkeys Plus" instead of "Poser Hotkeys" in MCM. At the same time, in the preceding column, all preceding columns are displayed as "OK" instead of "NG" My English is not good, so I used translation software. I hope it can help you
If you get the address library error, install the 'All in One' address library in the following link. It was posted in the comments of the Address Library mod and it does work, I had that issue with this mod and with others. The default poses now work, but now I have to figure out why the others aren't RIP.
So after downloading this mod, which I never even got working despite all the "fixes" posted in the comments, my game is broken to where I can't even load my save after uninstalling everything. Wonderful. To anyone who reads this, avoid this mod, it doesn't work
1133 comments
-
1
-
2
-
3
- ...
-
53
-
JumpQ. I updated from old PHP to Version2x, but the character does not posing and remains in idle.
A. From v2.0 is not compatible with the original Poser Hotkeys or old Poser Hotkeys Plus(v1) and old save data.
If you keep using old PHP's save data as it is, character will be idle.
Please create the clean save or do new game.
Q. MCM is not showing.
A. If do not show the MCM after waiting a few minutes, please try change the load order of esp.
If it still does not showing, please enter "setstage ski_configmanagerinstance 1" from the console.
Q. I installed all required Mods but the poser presets does not displayed on MCM and menu.
or I get an error that SKEE is not installed at startup.
A.If you installed this Mods and after installing Campfire or Sexlab etc., it will be overwritten by old PapyrusUtil SE included in those Mods and will not function properly.
So delete old PapyrusUtil SE included in installed mods or overwrite to new PapyrusUtil SE.
Q. How many poser Mods can registration?
A. this mod is no limit.
However, FNIS has an upper limit on the number of registrations, so the maximum number of FNIS registrations is the upper limit.
Q.FootIK OFF Spell is necessary?
A. It is not necessary because automatically disable FootIK when posing.
Q. Where is the created face presets? Also can I publish the my face presets to Nexus?
A. Version2 Face presets are saved in "Data/SKSE/Plugins/Poserhotkeys/FaceData"
And you can publish your created face presets to Nexus.
Q.I downloaded optional presets, but not getting any poses showing.
A.If the downloaded preset does not work, it is most users make installation mistakes.
Please check that the downloaded preset is correctly installed in the following directory.
"Data/SKSE/Plugins/PoserHotKeys/PoserData"
And if using MO, make sure there are no older presets in the overwrite folder.
Many of the reasons it doesn't work are due to problems with the way users install it.
I'm often asked by nexus users to update the presets for each pose mod, but it's difficult in time to accommodate weekly pose mods like GS Poses.
So I developed an editor that allows users to update their own presets.
This editor will allow you to add pose names and categorize to existing PHP presets and presets generated from PoserDataGen.
Of course, edit your favorite preset, so you can create your own poser pack.
The editing operation is very easy.
1. Create a new preset or load an existing preset (JSON).
Existing presets can be found at "Data\SKSE\Plugins\PoserHotKeys\PoserData".
(If you are using Mod Organizer, register "PoserDataEdit.exe" and execute it from MO)
2. If you want to create a new preset, open FNIS_MODNAME_LIST.txt in the pose mod you want to use.
Create a new file from the editor, add as many poses (rows) as you need, and enter the AnimEvent defined in the "AnimEvent" column.
For "PoseName", enter the pose name to be displayed in PHP's poser menu. (Double-byte characters can also be used)
(If "PoseName" is empty, "AnimEvent" will be displayed as the pose name)
3. Saving the preset will update the PHP poser menu.
(Presets must be saved to "Data\SKSE\Plugins\PoserHotKeys\PoserData")
This tool can be download from the Main file.
Good luck.
1. Go to the Address Library for SKSE plugins mod here in the Nexus and manually download the file "All in one (1.5.X)" don't install it, just save it anywhere in your computer.
2. Extract the zip folder, inside you'll find a file named "version-1-5-97-0.bin"
3. Copy this file into the mod folder of your already installed Address Library for SKSE plugins for AE (\mods\Address Library for SKSE Plugins\SKSE\Plugins)
4. PROFIT!
Now Poser Hotkeys Plus has been updated to your latest version.
EDIT : well i tested it and it works but im not sure if it's safe to do or not, i have no clue about what im doing oh and i forgot to say Thank you.
Uninstalled Mfg Fix, installed opparco mfg instead.
Install order looks to be:
> Poser Hotkeys Plus
> Opparco
> More Informative Console
------------------------------------------------------------
ORIGINAL POST - In case it helps anyone:
------------------------------------------------------------
Any ideas?? I can't get past MfgConsoleFunc.pex. It's driving me mad.
"Error: The modified Mfg Fix Script(MfgConsoleFunc.pex) has been overwritten by another MOD.
Please reinstall MfgConsoleFunc.pex of Poser Hotkeys Plus version because the original script
has a problem that cannot be get the strength of facial expression."
Even if I click thru the error message (takes about 3 or 4 tries to get it to go away)...
Nothing shows up in MCM. I waited a few minutes, and nothing showed.
(I'm also using Menu Maid 2, which solved a different mod not showing in menu last week.)
I've tried loading Mfg Fix before PHP
I've tried loading Mfg Fix after PHP
I've updated JContainers to 4.2.4
I've run Nemesis.
Using OStim. (That works fine.) (OStim doesn't list this as incompatible, FWIW.)
Using Photo Mode.
EDIT: Someone on Reddit posted a couple of years ago that starting a new game worked. I'll try that.
UPDATE: New game didn't make any difference.
It was an issue Opparco vs Mfg Fix and overall load order.
EDIT: Removing Poser Hotkeys, loading a save, saving again, and reinstalling Poser Hotkeys (now using MFG Fix instead of opparco's mod) apparently fixed the issue.
1. Close Poser Hotkeys Plus SSE and all referenced action mods.
2. Enter the game, load the save file, save and exit.
3. Download PoserDataGen（ https://www.nexusmods.com/skyrim/mods/72623 ）
4. Extract PoserDataGen and add a reference instance of PoserDataGen.exe in your mo2
5. Enable your poserdatagen in MO2, press the chair skyrim director to select your game directory (if correct, it will display a list)
6. Generate pose data. It will display a path to save the new JSON file
7. Copy these files to mods \ Poser Hotkeys Plus SSE \ SKSE \ Plug ins \ PoserHotKeys \ PoserData
8. Enable Poser Hotkeys Plus SSE and refresh fnis and neme
If your mod is successfully used, it will display "Poser Hotkeys Plus" instead of "Poser Hotkeys" in MCM. At the same time, in the preceding column, all preceding columns are displayed as "OK" instead of "NG"
My English is not good, so I used translation software. I hope it can help you
https://www.dropbox.com/scl/fi/yw72u6rh0aozrcasu5m4b/All-in-one-Address-Library-Fixed-Anniversary-Edition.zip?rlkey=34ywdc7bfvrr3hn8znkzqw2wj&st=j09jnssg&dl=0
-
1
-
2
-
3
- ...
-
53
-
Jump