on game pass is there a way to save ur loaded mods? i installed oxa and its not saving, like i have to activate it everytime i open the game.. i tried adding it to engine.ini and i get this in game after it skipps the main menu mod "Processing reload Monitor active CM successfully restored No saved mod config found, falling back to CDO Attempting to respawn mods
like the read me says, i added all three mods to engine.ini and they seem to be working, but it just isnt saving anything i do with or in the mod settings. the stalkerid, the flashlight customizer and oxa load when i load into game, just no config file apparently. like i have to reload the flashlight tool and any oxa setting changes all revert back to the default, and in the console it says "no mod config"
EDIT... its only the fl customizer. i thought it was sml, its not. thank u for answering so quick. if u have any suggestion why the no fov zoom doesnt seem to work for id like it, but no, ur mod is working as intended I did however have to put this in the ~mods folder for it to work tho Endorsed fully dude
Using the mod manager it makes me select one or multiple different options, and 2 of them are the same. Which ones am i supposed to select? I dont understand why people make mods like this then dont tell us how to actually make the mod work
I've written it earlier, but you need to switch your keyboard to American English for the key binding - and thus the console - to work. Assuming that's where the problem lies. In any case, that's what did the trick for me.
rodrigoxm49, I genuinely sympathise with you and many others here.
I can't understand why the author, with all due respect for the effort, is not listening to millions of complaints (with reason) and why only one console mod is available. I just want a better flashlight, that's all, nothing more. But it needs a friggin console to enable it.
I'm not a modding n00b - far from it. I created a few mods in UE4.xx but can't make this "simple" console mod work. Yes, my keyboard is always set to EN (US). I followed all the instructions to the letter, tried alternatives, edited input.ini, and so on, but nothing worked. Is there any other console mod? No console appears in the game, no matter what I do. (~, /, or any other key I tried to remap).
From what I can see, we're limited to this console mod, although many mod authors say, "Just use any STALKER 2 console mod and... [whatever]."
KZekai, just for fun, I managed the console to work by simply changing the files location.
Could you please change the instructions and .zip folder structure to point to the "~mods" folder, not to the "Paks" folder, which is above it?
Currently, your instructions say: 1. .... 2. Extract content of the zip-archive inside root folder. If you did everything correctly, "Simple_ModLoader.*" will be present inside "Stalker2\Content\Paks\" 3. Installation complete.
---------
*2. They should be present inside the "Stalker2\Content\Paks\~Mods\". ---------
And the structure of your .zip folder is "SimpleModLoader-304-0-0-8-1733358126.zip\Stalker2\Content\Paks\<mod files>" Instead, it should be "SimpleModLoader-304-0-0-8-1733358126.zip\Stalker2\Content\Paks\~Mods\<mod files>"
The same goes for the Flashlight Customizerο»Ώ mod: All files should be inside the \Content\Paks\~Mods\ folder.
NOTE: When installing the console mod for the first time, you must recompile the shaders; otherwise, the game will crash when you load. So, use regular "SimpleModLoader" files for the first run, and later, you can replace them with "SimpleModLoader_NoWarmUp" files.
I recommend installing separate KZekai's No Shader Warmup toggle mod since many of the mods require recompiling shaders to work properly (especially gfx/texture ones).
Thanks. You put me on the right track. A combination of letting Vortex put the files where they should be, and setting the KB to American English (you can change it back when you're done with the loader) worked for me. I also deleted input.ini (it gets rebuilt) before I loaded the game.
Hello, i have a problem, i use the tidle in game for opening the inventory, but its used by default by this mod, however upon changing the custom keybind, the tidle still remain in use, how would i fix this?
================================= GAMEPASS/GOG SPECIFIC FAQ ================================= Gamepass is not supported and will never be properly supported. ///////////////////////////
The mod works very well. I think the problem a lot of people have in getting it to work is that they haven't read the README. The console can be opened with different keys that vary depending on the keyboard. I tried one, then another, and finally the third option, the / key on the numpad, was the one that worked for me.
302 comments
2. THIS MOD HAS BEEN TESTED WITH GOG, STEAM, EPIC STORE AND GAMEPASS - IT WORKS ON ALL PLATFORMS.
3. READ README ABOUT GAMEPASS SPECIFICS!
4. THIS MODLOADER SUPPORTS THE FOLLOWING MODULES:
DebugInfo Mod (teleport anywhere!)
Flashlight Customizer
PhotoMode
SolidShadow's Toggleable HUD
Wide Screen (Ultrawide) HUD Fixο»Ώ
Stalker Faction Id (identify the stalker you aim at!)
Stalker 2 HUD Editor
If you are looking for in-game commands bundled with some basic help - check out DebugInfo Mod
5. GAME CRASHES AT STARTUP
If you are using any of my mods:
- FlashLight Customizer
- Photomode
- DebugInfo
update them all to latest version! This is critical. Other BP mods that use SML aren't affected.i tried adding it to engine.ini and i get this in game after it skipps the main menu mod
"Processing reload
Monitor active
CM successfully restored
No saved mod config found, falling back to CDO
Attempting to respawn mods
Done"
Any ideas or help would be awesome
like i have to reload the flashlight tool and any oxa setting changes all revert back to the default, and in the console it says "no mod config"
EDIT... its only the fl customizer. i thought it was sml, its not. thank u for answering so quick. if u have any suggestion why the no fov zoom doesnt seem to work for id like it, but no, ur mod is working as intended
I did however have to put this in the ~mods folder for it to work tho
Endorsed fully dude
key rebinding doesnt help
I can't understand why the author, with all due respect for the effort, is not listening to millions of complaints (with reason) and why only one console mod is available. I just want a better flashlight, that's all, nothing more. But it needs a friggin console to enable it.
I'm not a modding n00b - far from it. I created a few mods in UE4.xx but can't make this "simple" console mod work. Yes, my keyboard is always set to EN (US). I followed all the instructions to the letter, tried alternatives, edited input.ini, and so on, but nothing worked. Is there any other console mod? No console appears in the game, no matter what I do. (~, /, or any other key I tried to remap).
From what I can see, we're limited to this console mod, although many mod authors say, "Just use any STALKER 2 console mod and... [whatever]."
KZekai, iBerggman, just as an idea, maybe nonsense, but could be flashlight-related mods packed as DLC using Herbata's Mod-as-DLC Loader?
Please advise...
Could you please change the instructions and .zip folder structure to point to the "~mods" folder, not to the "Paks" folder, which is above it?
Currently, your instructions say:
1. ....
2. Extract content of the zip-archive inside root folder. If you did everything correctly, "Simple_ModLoader.*" will be present inside "Stalker2\Content\Paks\"
3. Installation complete.
---------
*2. They should be present inside the "Stalker2\Content\Paks\~Mods\".
---------
And the structure of your .zip folder is "SimpleModLoader-304-0-0-8-1733358126.zip\Stalker2\Content\Paks\<mod files>"
Instead, it should be "SimpleModLoader-304-0-0-8-1733358126.zip\Stalker2\Content\Paks\~Mods\<mod files>"
Thanks.
All files should be inside the \Content\Paks\~Mods\ folder.
NOTE: When installing the console mod for the first time, you must recompile the shaders; otherwise, the game will crash when you load. So, use regular "SimpleModLoader" files for the first run, and later, you can replace them with "SimpleModLoader_NoWarmUp" files.
I recommend installing separate KZekai's No Shader Warmup toggle mod since many of the mods require recompiling shaders to work properly (especially gfx/texture ones).
In a nutshell, see this screenshot.
Edit: Nevermind it works. The key was somewhere in numpad. Just followed the readme instructions.
I moved all the files into the mods folder instead of the paks one, and it worked!
Stalker2 \ Content \ Paks \ ~mods ..........its OK !!!
π Simple_ModLoader.pak (3.9 MB)
π Simple_ModLoader.ucas (557.0 kB)
π Simple_ModLoader.utoc (5.3 kB)
π Simple_ModLoader_0_P.pak (620 B)
π stalker_IDs.txt (7.4 kB)
π stalker_commands.txt (13.5 kB)
π ue_cvars.txt (842.4 kB)
If I have this enabled, UETools console never shows up, no matter if I rebind any of them.
afterwards ingame press / (THIS IS ON YOUR NUMPAD)
GAMEPASS/GOG SPECIFIC FAQ
=================================
Gamepass is not supported and will never be properly supported.
///////////////////////////